HPE ProLiant MicroServer Gen10 Plus v2
180 W, 100–240 V AC power adapter P19429-001
iLO enablement module P19427-001 P13788-B21 ??
Intel Pentium Gold G6405, 4.10 GHz, 2C, 58 W P45399-001
Intel Xeon E-2314, 2.80 GHz, 4C, 65 W P45373-001
16 GB, dual-rank x8 PC4-3200AA-E P44877-001
32 GB, dual-rank x8 PC4-3200AA-E P44878-001
нову карту рейду, таку як E208i-p або p408i-p.
System board
P56988-001
P64560-001 (for systems using iLO v2.81 or later ASIC)
Front panel LED power fault codes
The following table provides a list of power fault codes, and the subsystems that are affected. Not all power faults are used by all servers.
Subsystem LED behavior
System board 1 flash
Processor 2 flashes
Memory 3 flashes
Riser board PCIe slots 4 flashes
FlexibleLOM 5 flashes
Storage controller 6 flashes
System board PCIe slots 7 flashes
Power backplane 8 flashes
Storage backplane 9 flashes
Power supply 10 flashes
PCIe expansion cards installed in riser board 11 flashes
Chassis 12 flashes
GPU card 13 flashes
HPE RAID Controller Smart Array E208i-p SR Gen10 SAS 12G PCI-E LP 836266-001
Essential RAID Controller HPE Smart Array E208i-p SR Gen10 Controller
HPE Smart Array P408i-a SR Gen10
https://www.ceneo.pl/97333968
Position Default Function
S11 Off
Off—iLO 5 security is enabled.
On—iLO 5 security is disabled.
S2 Off Reserved
S3 Off Reserved
S4 Off Reserved
S51 Off
Off—Power-on password is enabled.
On—Power-on password is disabled.
S6 1,2 3 Off
Off—No function
On—Restore default manufacturing settings
S7 Off Reserved
S8 Off Reserved
S9 Off Reserved
S10 Off Reserved
S11 Off Reserved
S12 Off Reserved
1
To access the redundant ROM, set S1, S5, and S6 to On.
2 When the system maintenance switch position 6 is set to the On position, the system is prepared to restore all configuration settings to their manufacturing defaults.
3 When the system maintenance switch position 6 is set to the On position and Secure Boot is enabled, some configurations cannot be restored. For more information, see Configuring the server.